FRONT BUSHING KITS

Inner and Outer Urethane Axle Beam Bushing Kit for King & Link Pin front beams w/Needle Bearings. 1.75 OD 1.5 inches ID 7.75 inches Long 2 inches OD on outer seal portion These will replace your needle bearings and the seal. They are made to replace both the inner and the outer needle bearing Suspension: King Pin Replaces: All Needle Bearings Quantity: 4 Pieces

BUGPACK BRAND Pro-thane Axle Beam Tube Seals for King/Link Pin Beams. These seals will go between the front trailing arms and the beam to keep out harmfull particles. This is a must as stock seals don't seal as well Suspension: King Pin Replaces: Trailing Arm Seals Quantity: 4 Pieces

Inner & Outer Urethane Beam Bushing Kit for King and Link Pin Beams with Micarta Bushings. These will replace both the inner and the outer needle bearings and seals. Please Note: these are for stockLink/King Pin beams with MICARTA bushings and are not the most common replacement for a King Pin. ALSO USE WITH EMPI ALUMINUM BEAM WITH SHOCK TOWERS. 1.83 OD 1.47 ID 7.25 Long 2.07 seal portion OD Suspension: King Pin Replaces: Inner, Outer Bearing Quantity: 4 Pieces

BUGPACK BRAND Front bushing kit for King Link Pin beams. The are original PROTHANE by Bugpack. Inner and Outer Bearing replacement Suspension: King Pin Replaces: Needle Bearings Quantity: 4 Pieces

Outer King Pin front suspension seals. Urethane Axle Bushing Kit for King/Link Pin Front Beams w/Needle Bearings. These bushings will replace your stock needle bearings and seals. The particular part will replace only the outer needle bearings. 1.81 inches OD 1.5 inches ID .475 inches Long 2.07 inches seal end portion OD Suspension: King Pin Replaces: Outer Needle Bearing Quantity: 4 Pieces

Outer seals for your King Pin front suspension. Urethane Axle Beam Bushing Kit for King/Link Pin With Micarta Bushing. 4 pc. set. 1.82 inches OD 1.5 inches ID .375 inches Long 2.1 inches Seal portion OD Suspension: King Pin Replaces: Micarta Bushings Quantity: 4 Pieces

BUGPACK BRAND USE WITH EMPI ALUMINUM BEAM W/O SHOCK TOWERS These are original PROTHANE by Bugpack. Fits 46mm Tubes Suspension: Aluminum Beam Replaces: Needle Bearings Quantity: 4 Pieces

Inner and Outer Urethane Beam Bushing Kit For Ball Joint Beam. This kit will replace the inner and outer needle bearings on your ball joint front suspension. It will also replace the seal. Great alternative to pressing in new needle bearings Large Size 1.75 inches OD 1.42 inches ID 6.313 inches Long Small Size 1.75 inches OD 1.45 inches ID 6 inches Long Suspension: Ball Joint Replaces: Needle Bearings Quantity: 4 Pieces

BUGPACK BRAND Front bushing kit for VW Bus. The are original PROTHANE by Bugpack. Fits 46mm Tubes Inner and Outer Bearing replacement Bus Type 2: 55-63 Replaces: Needle Bearings Quantity: 4 Pieces

BUGPACK BRAND For Narrowed Beams. Front bushing kit for VW Bus. The are original PROTHANE by Bugpack. 53mm OD 50mm ID to 43mm ID Inner and Outer Bearing replacement Bus Type 2: 64-67 Replaces: Needle Bearings Quantity: 4 Pieces

Urethane Axle Beam Tube Seals for Ball Joint Beam. These go between the trailing arm and the beam to keep out harmfull particles. A must when offroading Suspension: Ball Joint Replaces: Trailing Arm Seals Quantity: 4 Pieces

Outer Urethane Beam Bushing Kit for Ball Joint Beam. These bushings will replace the seal and the outer needle bearing on your ball joint front suspension Suspension: Ball Joints Replaces: Outer Needle Bearing Quantity: 4 Pieces

Urethane Axle Beam Bushing Kit for Aluminum King/Link Pin Beams w/ 45mm Tubes. This is a must if you have a aluminum or steel beam with 2 inches tube .120 wall cross tubes. WILL NOT FIT EMPI BRAND ALUMINUM BEAMS These are 6 inches long This takes care of what the stock needle bearings would have done and provides the support for your trailing arm to pivot on. Also acts as a seal to keep out harmfull particles Suspension: King Pin Aluminum Replaces: Needle Bearings Quantity: 4 Pieces