BALL JOINT FRONT END PARTS

Ball joint. Fits Bus 68-79 If you can lift your car up and the wheel can be moved in and out by pressing on the top or bottom of the tire, then it is time for new ball joints. Also squicking and creeking is a indicator that these are worn. Bus Type 2: 68-79 Quantity: Sold Each

Ball Joint Camber Adjusters. For Use When Lowering Your Ball Joint Front Suspension To Provide The Proper Camber. Sold In Pairs. Fits Ball Joint Front Ends Only.

Ball joint. Fits Thing 73-74 If you can lift your car up and the wheel can be moved in and out by pressing on the top or bottom of the tire, then it is time for new ball joints. Also squicking and creeking is a indicator that these are worn. VW Thing: 73-74 Quantity: Sold Each

Ball joint. Fits Thing 73-74 If you can lift your car up and the wheel can be moved in and out by pressing on the top or bottom of the tire, then it is time for new ball joints. Also squicking and creeking is a indicator that these are worn. VW Thing: 73-74 Quantity: Sold Each

Replacement spindle nut for your Type 2 Bus. 32mm Hex 22 x 1.5 thread Right Hand Sold Each

Have a bent or damaged spindle? Here is a set of brand new ball joint spindles to get you back on the road. Let side is drilled for speedometer cable. Available for ball joint only. Machining required. Sold in pairs. Right and left hand thread. Front Beam: Ball Joint Beetle Type 1: 66-74 Quantity: 2 Pieces

Ball Joint Camber Adjusters. For Use When Lowering Your Ball Joint Front Suspension To Provide The Proper Camber. Sold In Pairs. Fits Ball Joint Front Ends Only

Replacement left side spindle nut for Type 1 66-79, Ghia 66-74 and Type 3 66-73. Application year: 66-79 Beetle Type 1: 66-79 Ghia: 66-74 Type 3: 66-73

Replacement inner front wheel bearing fits type 1 66-68, ghia 66-68 and type 3 66-68. Application year: 65,66,67,68. Inner diameter: 1.058 inches Outer diameter 1.982 inches Thickness: .420 inches

Replacemant right side spindle nut fits Type 1 66-79, Ghia 66-74 and Type 3 66-73. Application year: 66-79 Beetle Type 1: 66-79 Ghia: 66-74 Type 3: 66-73

Application year: 65,66,67,68,69,70,71,72,73,74,75,76,77,78,79

PREMIUM VERSION TRW BRAND Lower ball joints for vw beetle. Replace worn out and noisey joints with these new ones. Boots included. Must be pressed in and out. Will not work on Super Beetle Beetle Type 1: 66-77 Ghia: 66-77 Quantity: Sold Each

Radiused lower ball joint, modified to allow more suepension travel for lowered or raised cars

Radiused upper ball joint, specially modified to allow more suspension travel for lowered or rased cars

Needle bearing for King pin front beams. Fitment: Beetle Type 1: 60-65 Upper/Lower Ghia: 60-65 Upper/Lower Beetle Type 1: 66-78 Upper Ghia: 66-74 Upper

Outer Urethane Beam Bushing Kit for Ball Joint Beam. These bushings will replace the seal and the outer needle bearing on your ball joint front suspension Suspension: Ball Joints Replaces: Outer Needle Bearing Quantity: 4 Pieces

Inner and Outer Urethane Beam Bushing Kit For Ball Joint Beam. This kit will replace the inner and outer needle bearings on your ball joint front suspension. It will also replace the seal. Great alternative to pressing in new needle bearings Large Size 1.75 inches OD 1.42 inches ID 6.313 inches Long Small Size 1.75 inches OD 1.45 inches ID 6 inches Long Suspension: Ball Joint Replaces: Needle Bearings Quantity: 4 Pieces

Replace your worn out stock torsion seal with these new oem replacements. Lower replacement These go between the front trailing arm and the beam to prevent dirt from getting into the beam cross tube Beetle Type 1: 66-77 Ghia: 66-77 Quantity: Sold Each

Urethane Axle Beam Tube Seals for Ball Joint Beam. These go between the trailing arm and the beam to keep out harmfull particles. A must when offroading Suspension: Ball Joint Replaces: Trailing Arm Seals Quantity: 4 Pieces

Application year: 66-77. These are sold each so you will need 2 sets to complete a beam Beetle Type 1: 66-77 Sold: Each