OIL BREATHERS

Breather Hose Kit for your VW

If you value your engine then the bugpack breather system is a must. It is designed to relieve engine crankcase pressure without spillage or loss of oil from the system EMPI s complete engine VW oil breather kit is made from cast aluminum and helps reduce crankcase pressure, eliminate blow-by and oil loss. High revving modified engines require more crankcase ventilation than the stock breather can supply. With the aluminum oil breather kit the blow-by oil is collected in the foam filter and the air vapors are vented to the atmosphere. The kit includes heavy duty breather hose, plus internal baffles that include a screen mesh shelf to elevate the foam filter element. The breather box kit includes 8 feet of 1/2 oil hose, 5 vent fittings and 5 hose clamps.

Breather Hose Kit for your VW

Excellent way to decrease crank case pressure without getting oil all over your car. Measures 8-1/2 inches tall Height: 8-1/2 inches Ports: 3 at 1/2 inches diameter

Billet breather system. Function and form. Finish off your sand car with these polished billet breathers. Measures 9-1/2 inches wide.... 3/8 npt fittings

Compact micro breather will fit just about anywhere. Billet aluminum clamps fits 1-1/2 inches tubing. Overall height: 3 5/8 inches Overall width: 3 1/2 inches Tubing Diameter: 1 1/2 inches Fitting Size: 1/4 inches NPT Thickness: .264 inches

Compact micro breather will fit just about anywhere. Billet aluminum clamps fits 1-3/4 inches tubing. Overall height: 3 5/8 inches Overall width: 3 1/2 inches Tubing Diameter: 1 3/4 inches Fitting Size: 1/4 inches NPT Thickness: .264 inches

Replaces stock oil fillers, works on any size engine. This is a easy way to add ventilation to your engine. Chrome finish for a custom look. Hose nipples: 2 x 1/2 inches . Length: 3.342 inches Width: 2.48 inches Engine Type: All Type 1 VW Finish: Chrome Height: 7-1/2 inches

The EMPI dual purpose oil filler & breather includes a system of internal baffles that seperate the oil from the hot air then returns the oil back into the engine. It mounts upright on the alternator stand making for easy oil filling and was designed to look like part of the engine. The billet aluminum filler cap seals with an o-ring seal and the button head allen top screws. Vent your valve covers, crankcase and air cleaners. Comes with attaching nut, o-rings, gaskets and instructions

Chrome canister breather is a easy way to vent your motor. 4 port hook-up allows for plenty of lines from the motor. 1-1/2 inches billet clamp makes for easy installation. Measures 5-1/4 inches tall Clamp Size: 1-1/2 inches Height: 5-1/4 inches Ports: 4

This breather will fit on the end of the alternator stand or any 3/8 pipe fitting. Works great for venting your motor. Chrome shield adds both a custom look and protection

This center mount breather will fit on the end of the alternator stand or any 1/2 inches hose barb. Works great for venting your motor Diameter: 2 inches Height (Filter): 1 1/2 inches Height (Overall): 2 1/8 inches

Replacement breather element for our billet oil breather system. Chrome shield and washable gauze element to help keep the dirt out of your engine. Sold each

This breather hose from EMPI has a 1/2 inside diameter and comes in 8 foot lengths. This hose is not designed for high pressure applications and only fits stock VW motors as a crank case breather hose, which connects the oil filler neck to the air cleaner. This product fits Standard Beetle through 1977, Super Beetle through 1979, Karmann Ghia through 1974, all Type 3s through 1973, and all Thing models.

Extra large capacity for large high performance engines. All boxes are 8-3/4 inches long and 4-1/2 inches tall. Setup for #8 an fittings Length: 8-3/4 inches Height: 4-1/2 inches Fitting Size: -8

Nice compact aluminum oil breather. Allows for a single bottom hook up. Comes with replaceable filter. Thread: 1/4 inches NPT Material: Aluminum Mount Size: 1-1/2 inches Height: 7 1/4 inches