Latest Rage

5/8 inches 36 spline u-joint in chrome. Makes building a steering system a snap. Slides directly onto almost every rack. Slips on and clamps

Latest Rage master cylinder rebuild kit. This will do our 5/8 bore round cylinders. Brand: Latest Rage Style: Round Size: 5/8 Bore

Billet headset hanger to keep your communications equipment in place while you ride or park. Made of billet aluminum, this attractive piece will simply clamp onto a 1-1/2 inches tube. Sold each

Polished billet aluminum plate to mount your ORV stickers. Bolt on or use a billet clamp number AC740114 for a quick easy mount to 1-1/2 inches tube (clamp not included). Lighted for good visibility at night. Width including light: 3 3/8 inches Height: 4 1/4 inches Width: 2 3/4 inches Mounting Pattern: 1 inches x 1 inches

Ball Joint Billet spindle nuts are a great way to attach spindle mount rims. These nuts eliminate the hassle of all the parts needed to attach the wheel with the stock nuts and locks. Simply crank on the nuts and then lock it in place with the allen bolt. Chromoly for strength. SOLD AS PAIR

Red Precision machined from aluminum this pointer offers 4 degrees of adjustment to insure accurate timing for maximum performance. Mounts to any type 1 case. Fits stock and power pulleys. Note: Will not work with Serpentine Pulley Kits.

Light mounts for small billet lights. Fits 1-3/4 inches tubing. Perfect solution to avoid welding when adding more lights

Billet clamp for new school mirror to bolt to 1-1/2 inches tubing

50w billet light. These custom lights are a nice addition to any car. Small in size allows placement about anywere. Wires come out of the bolt bottom for a slick installation. The base stands the unit 3 inches off the mount and has a stud Sold Each Diameter: 2-1/4 inches Depth: 3-1/2 inches Base Height: 3 inches

Replacement lens for baja tail lights.

Inserts into tubing to provide a clean cool look to your custom car. Led light with clear lens and amber light. Dual function Diameter: 1-5/16 inches Length: 1.458 inches Light Type: LED

Chrome fuel pressure regulator with 1/8 inch NPT hose fittings. Use this unit to restrict fuel flow to your carbs. Most electric pumps can pump more fuel then your carbs need. Use this simple screw designed regulator to cut it back Fuel Pressure Range: 1.5 to 8.5 PSI Fitting Size: 1/8 inch NPT Adjustment Type: Screw

Very high quality and uses the wide style fuses that are easy to see when they fail. Sealed top helps keep out sand. Length of top: 3.73 inches Width including side terminals: 1.775 inches Mount hole spacing: 4 1/8 inches Length: 4.800 inches Width (Body): 1.150 inches Height: 1 1/2 inches

Very high quality and uses the wide style fuses that are easy to see when they fail. Sealed top helps keep out sand. Length of top: 2 1/8 inches Width including side terminals: 1.778 inches Mount hole spacing: 2 9/16 inches center-to-center Length: 3 1/4 inches Width (Body): 1 1/8 inches Height: 1 1/2 inches

Shaped with a single post. Use to mount mirrors, lights etc. Available in 1-1/2 and 1-3/4 tubing Clamp Size: 1-1/2 inches Thickness: .660 inches Hole Thread: 3/8-16

Billet oil filter adapter for remove oil filter or full flow setup. Ports up design makes this adapter work just about anywere

Nice compact aluminum oil breather. Allows for a single bottom hook up. Comes with replaceable filter. Thread: 1/4 inches NPT Material: Aluminum Mount Size: 1-1/2 inches Height: 7 1/4 inches

Aluminum Vertical Oil Filler with Grooved Cap threads into the generator or alternator stand on Type 1 and 2 upright engines. The vertical position of the oil filler makes filling the engine with oil much easier. The filler is made from 6061 T-6 aluminum and fully polished. A 1/4 NPT - 1/2 barbed breather hose fitting. A billet aluminum cap threads on to the top of the filler and is grooved for to make installation and removal simple. Blue Anodized

Aluminum Vertical Oil Filler with Grooved Cap threads into the generator or alternator stand on Type 1 and 2 upright engines. The vertical position of the oil filler makes filling the engine with oil much easier. The filler is made from 6061 T-6 aluminum and fully polished. A 1/4 NPT - 1/2 barbed breather hose fitting. A billet aluminum cap threads on to the top of the filler and is grooved for to make installation and removal simple. Blue Anodized

Inserts into tubing to provide a clean cool look to your custom car. Led light with clear lens and red light. Dual function Diameter: 1-5/16 inches Length: 1.458 inches Light Type: LED

Weld on spark arrestor requires 3.5 inches opening. 4 inches outlet. Fully tunable by adding discs Outlet Size: 4 inches Inlet Size: 3-1/2 inches Attachment Style: Weld On