Switch Panels

Quickcar 50-863 Black Plate 6 Switches & 1 Button Fused This QuickCar Switch Panel comes with 1 ignition switch 1 starter button and 5 accessory switches installed in a black plate. The single pole toggle switches (6 total) are all prewired to corresponding fuse blocks that are directly above each switch. The panel dimensions are 6-7/8 In wide and 3-1/4 In tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple. Main power cable and starter wire are professionally crimped soldered and heat shrunk for superior quality. Simply route wires from your ignition and accessories and crimp them into the attached spade connectors on each fuse block to complete install. Fuses and installation hardware not included.

Quickcar 50-869 6 Switches & 1 Button w/ Lights & Circuit Breakers This QuickCar Switch Panel comes with 1 ignition switch 1 starter button and 5 accessory switches installed in a black plate. The single pole toggle switches (6 total) are all prewired to corresponding circuit breakers that are directly above each switch and lights below each switch. The panel dimensions are 6-7/8 In wide and 5 In tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple. Main power cable and starter wire are professionally crimped soldered and heat shrunk for superior quality. Simply route wires from your ignition and accessories and crimp them into the attached spade connectors on each breaker to complete install. Different Indicator Light colors and Circuit Breaker ratings are available by calling 1-800-997-7333.

Quickcar 50-868 6 Switches & 1 Button w/ Breakers This QuickCar Switch Panel comes with 1 ignition switch 1 starter button and 5 accessory switches installed in a black plate. The single pole toggle switches (6 total) are all prewired to corresponding circuit breakers that are directly above each switch. The panel dimensions are 6-7/8 In wide and 4 In tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple. Main power cable and starter wire are professionally crimped soldered and heat shrunk for superior quality. Simply route wires from your ignition and accessories and crimp them into the attached spade connectors on each breaker to complete install. Comes with standard 20 amp breakers. For other breaker rating options please call 1-800-997-7333 and speak with a QuickCar representative.

Quickcar 50-740 Ignition Panel Extreme 4 Switch w/ Pigtail QuickCars Extreme Switch Panel includes 1 waterproof micro momentary starter switch and 3 single pole on/off micro switches for ignition and an accessories. Panel dimensions are 4-1/8 wide and 3 tall. QuickCar Extreme Switch Panels use high current specially wound copper wiring to provide high tensile strength. All connectors are professionally crimped and soldered for superior quality. All connections are gold/tin plated for improved current transfer/resistance to oxidation. QuickCars ignition panel is pre-wired to be a plug-n-play option for their Ignition Harnesss (parts 50-200 and 50-201).

Quickcar 50-711 Extreme Dual Ignition 3 Switch Panel QuickCars ignition panel is pre-wired to be a plug-n-play option for their Dual Ignition Harness (pt.#50-2021). It includes 1 waterproof micro momentary starter switch a single pole on/off micro switch for ignition and a micro cross over switch to swap ignition boxes. Panel dimensions are 4-5/8 wide and 2-1/2 tall. QuickCar Extreme Switch Panels use high current specially wound copper wiring to provide high tensile strength. All connectors are professionally crimped and soldered for superior quality. All connections are insulated with heat shrink tubing and gold plated for improved current transfer/resistance to oxidation.

Quickcar 50-031 Single Ignition 2 Switches & 1 Button Flag Plate Panel This QuickCar Switch Panel comes with 1 ignition switch 1 starter button and 1 accessory switch installed in a checkered flag designed plate. Comes with waterproof single pole toggle switches. The panel dimensions are 4-5/8 In wide and 2-1/2 In tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple. All wires are professionally crimped soldered and heat shrunk for superior quality. 50-031 comes with WeatherPack connections and is a direct fit to QuickCar s 50-2031 50-2032 50-2033 50-2035 50-2051 and 50-2053 wiring harnesses. Harness and installation hardware not included.

Quickcar 52-864 Rocker Switches Fused & Lit with Black Plate Ignition Panel with Fused and Lit Rocker Switches mounted in a black panel. Same in quality to traditional QuickCar toggle Switch Panels but with premium quality Rocker Switches. QuickCars Rocker Switches have a 25-amp capacity dust/water resistant and include screw-on terminal connections. Panels are completely pre-wired and ready to install. Panel dimensions are 7 wide and 3-1/2 tall. This is a direct fit to QuickCars 50-200 or 50-201 wiring harnesses.

Quickcar 52-166 Rocker Switches Lit with Flag Plate Ignition Panel with Lit Rocker Switches mounted in a checkered flag designed panel. Same in quality to traditional QuickCar toggle Switch Panels but with premium quality Rocker Switches. QuickCars Rocker Switches have a 25-amp capacity dust/water resistant and include screw-on terminal connections. Panels are completely pre-wired and ready to install. Panel dimensions are 7 wide and 3 tall. This is a direct fit to QuickCars 50-200 or 50-201 wiring harnesses.

Quickcar 50-7611 Extreme Dual Ignition 6 Switch Panel QuickCars Extreme Switch Panel includes 1 waterproof micro momentary starter switch 4 single pole on/off micro switches for ignition and accessories and a micro cross over switch to swap ignition boxes. Panel dimensions are 3-1/4 wide and 4-1/2 tall. QuickCar Extreme Switch Panels use high current specially wound copper wiring that provide high tensile strength. All connectors are professionally crimped and soldered for superior quality. All connections are gold/tin plated for improved current transfer/resistance to oxidation. QuickCars ignition panel is pre-wired to be a plug-n-play option for their Ignition Harness pt.# 50-2021.

Quickcar 52-165 Rocker Switches w/ Flag Plate Ignition Panel with Rocker Switches mounted in a checkered flag designed panel. Same in quality to traditional QuickCar toggle Switch Panels but with premium quality Rocker Switches. QuickCars Rocker Switches have a 25-amp capacity dust/water resistant and include screw-on terminal connections. Panels are completely pre-wired and ready to install. Panel dimensions are 7 wide and 3 tall. This is a direct fit to QuickCars 50-200 or 50-201 wiring harnesses.

Quickcar 50-823 Black Plate 2 Switches & 1 Button w/ Flip Cover & Lights This QuickCar Switch Panel comes with 1 ignition switch 1 starter button and 1 accessory switch installed in a black plate. Double pole toggle switch ignition has a flip cover while the accessory has a black boot. The panel dimensions are 4-5/8 In wide and 4-3/8 In tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple. Switches come with colored indicator lights to signal if the switch is turned on or off. All wires are professionally crimped soldered and heat shrunk for superior quality. 50-823 is a direct fit to QuickCar s 50-200 (ignition box) or 50-201 (HEI) wiring harnesses. Harness and installation hardware not included.

Quickcar 52-865 Rocker Switches with Black Plate Ignition Panel with Rocker Switches mounted in a black panel. Same in quality to traditional QuickCar toggle Switch Panels but with premium quality Rocker Switches. QuickCars Rocker Switches have a 25-amp capacity dust/water resistant and include screw-on terminal connections. Panels are completely pre-wired and ready to install. Panel dimensions are 7 wide and 3 tall. This is a direct fit to QuickCars 50-200 or 50-201 wiring harnesses.

Quickcar 50-1713 Dual Ignition 5 Switches w/ 3 Wheel Brake This QuickCar Switch Panel comes with 1 starter switch 1 ignition switch 1 3-wheel brake switch 1 accessory switch and 1 cross-over switch installed in a checkered flag designed plate. 50-1713 uses aircraft grade weatherproof toggle switches for maximum durability. This panel is designed to be plug-n-play with QuickCars 50-2021 Dual Ignition Harness. Simply plug the pre-wired WeatherPack connector on the back of the switch panel to the harness for flawless wiring of the ignition system. When used properly this panel provides a means of swapping from Ignition Box A to Ignition Box B by simply flipping a toggle switch. In addition a 3 ft. 3-wheel brake harness is installed on the switch panel to provide a means of shutting off brake pressure to the RF brake caliper. Ignition harness and panel installation hardware not included.

Quickcar 50-2037Modified Single Ignition Harness & Black Switch Panel QuickCar s Professional Performance Wiring Harness made specifically for IMCA/UMP style dirt modified cars. A complete In plug-n-play In system with ignition box connection coil and distributor connections analog tachometer output solenoid and a switch panel connection. Included with this is a 1 ignition switch 1 starter button and 1 accessory switch panel pre-wired to plug into the harness. All opposite ends needed: MSD box coil pigtail distributor ends and tach plug are all included to provide all of your electrical components with a weather-tight connection for superior performance. Weatherproof single pole toggle switches are used in the switch panel and ALL ring terminals and WeatherPack pins come professionally crimped and soldered.

Quickcar 50-163 Flag Plate 6 Switches & 1 Button Fused This QuickCar Switch Panel comes with 1 ignition switch 1 starter button and 5 accessory switches installed in a checkered flag designed plate. The single pole toggle switches (6 total) are all prewired to corresponding fuse blocks that are directly above each switch. The panel dimensions are 6-7/8 In wide and 3-1/4 In tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple. Main power cable and starter wire are professionally crimped soldered and heat shrunk for superior quality. Simply route wires from your ignition and accessories and crimp them into the attached spade connectors on each fuse block to complete install. Fuses and installation hardware not included.